Golfers who want to ensure that their clubs are a perfect fit for them may start to get involved in golf club fitting and tinkering.
Having the ability to change your golf clubs a bit and bend them to the proper angle could save you from having to purchase new clubs.
Players who find their clubs are off by a degree or two can simply use a lie and loft machine to get the clubs to where they need to be.
However, in order to complete this process, there are some things you need to know about club fitting and about golf in general.
If you are trying to bend your golf clubs and you need a bit of direction, we have all the answers you need.
How To Bend Golf Clubs (Step by Step)
Here are the steps to bend golf clubs, but remember that you will need to check the individual recommendations of the lie/loft machine you purchase.
In addition, make sure that the iron you are bending can be bent because some iron options must stay in their original specifications.
Step 1: Get The Proper Equipment
In order to bend golf clubs, you are going to need a golf club lie and loft machine.
There is no other way to do this accurately and consistently.
For the most part, if you bend one iron, you are going to want to bend them all.
This is what makes it essential to choose the proper lie/loft machine and learn how to use it properly.
Once you have a machine in place, you can start to work on your golf clubs.
Step 2: Determine How You Are Going To Adjust Lie
You will need to hit with your clubs on a lie board using lie tape.
When you do this, you can get an idea of how much you need to adjust your golf clubs.
It is not a good idea to just start making adjustments and then testing it out.
Ideally, it is not a good idea to change the loft on your irons over and over again.
This is the same as the popular construction concept, “Measure twice, cut once.”
Step 3: Set The Club Head
Once you know what your end goal is and you have the equipment you need, you can start to adjust your golf clubs accordingly.
In order to do this properly, you will want to ensure that you have the club properly set in the lie and loft machine.
The club will fit in so that the club is level both horizontally and vertically.
There are markings on the lie and loft machine that will let you put the club in the proper place.
Once you have the clubhead properly set, then you will need to ensure that it is clamped in securely.
The only way to be able to maneuver the clubhead and get the proper lie is if it fits appropriately into the lie and loft machine.
Step 4: Initial Measurements
Although you may know that you want to change the lie by two degrees, you must first know where the lie of the club stands currently.
Once you have your club securely in the lie and loft machine, get an initial measurement to see what the lie and loft are currently.
When you do this, you must make sure that the shaft is resting on the shaft plate.
Then you can move the lie plate to be able to see the numbers.
Most of the golf clubs that you are working with will be set to a standard lie and loft.
If you see something that really stands out as being wrong, ensure that you indeed measure correctly.
Write these numbers down so that you have them to use later on.
Step 5: Make Adjustments
At this point, you are ready to start bending the golf clubs.
The lie and loft machine will have a bending bar that will help give you the strength necessary to achieve the desired loft and lie on your clubs.
The bending bar will sit on the hosel of the club, and this is where you will work to change the angles of the club.
It’s important to remember that you are only going to be changing by a degree or two.
It is not necessary to make any sudden movements with the bar or try and really bend the club a large amount.
Simply apply some pressure against the hosel, and then you will be able to bend the club using bumping motions.
Although this process is a bit easier for someone who has a lot of strength, it is possible for all types of golfers.
Some great club fitters will simply know how much they have to bend because of how much pressure they add to the machine.
If you are new to club fitting, there is going to be a little more trial and error involved in this.
We can assure you that it is better to be cautious with this process and ensure that you don’t push too hard than to overdo it and have to bend back.
Step 6: Measure Again
Once you have finished the bending process, you are going to want to measure again and make sure that you have the proper angles.
If the angles are no longer correct, then you will have to repeat the process.
The good thing about the lie and loft machine is that reading the measurements after you have taken the club out is quite easy to do.
Simply take a look at what you have done and see if the measurement is where you need to be.
If not, start bending until you have things done properly.
Step 7: Test Your Clubs
Once you have completed this process, it is time to take your clubs out and give them a try.
Overall, you will find that the clubs will have a slightly different performance because of the way you adjusted them.
We recommend using some more lie tape to see if you are hitting the ball as you should at this point.
The testing of your clubs will help you to ensure that you have indeed made the right choice by adjusting the loft or lie.
This is a good thing to do before you change the loft on all of the clubs in your bag.
If you end up not liking the way the adjustments impact your swing, you can save yourself a lot of work by testing before you bend again.
It is fairly interesting to see how much a degree or two can change the performance of a club.
Why Do I Need To Bend My Golf Clubs?
Are you wondering why it may be necessary to bend your clubs in the first place?
This is a good question and one that not enough players truly understand.
The game of golf is very complicated, and people will have all different types of swings and swing techniques.
If you are a golfer who is struggling with the way you are hitting the ball, it often makes sense to ensure that your equipment is properly fitted for your game.
Sometimes if your height is outside of the range of standard or normal, the golf clubs won’t get to the impact position the same way they should each time.
If your club is not being delivered squarely at impact, you certainly can’t expect to hit the ball nearly as well as you would with a squared face.
Golf clubs can be bent so that they are a better match for your golf swing.
The bending of golf clubs does not damage them, but instead, it makes it easier for you to pull off the shots that you need without having to change your equipment.
If you want to bend the golf clubs yourself, you will need to purchase some equipment to help you with the process.
However, you can also bend the golf clubs at a local facility that helps ensure that this is done accurately.
There are club fitting shops and golf courses that will help you get your lie and loft perfect throughout your entire golf set.
Is It Hard to Bend Golf Clubs?
It is not difficult to bend golf clubs if you have the right tools, a little bit of strength, and you are good at measuring angles.
When a person decides to become a PGA Professional, they have to learn to bend golf clubs as part of the program.
Most people are taught this skill in the matter of a day, and they are able to take it with them for the rest of their lives.
It’s important for golfers to understand and consider that when you change the lie angle on the club, it can affect the overall performance of the golf club as well.
You will want to avoid bending and then re-bending the golf clubs, so try and get the measurements right and do this process just one time.
How Much Does It Cost To Bend Golf Clubs?
If you have decided that the bending of the golf clubs is not quite the best choice for you, then you can take it somewhere to have it done for you.
There are many places that will handle this process, and it is typically very affordable.
You have to remember that, unlike regripping a club, there is no waste with the bending, and the process seems to go by rather quickly.
Since you won’t need to pay for a new grip, you are really just getting the use of the lie and loft machine and the time of the club fitting professional.
You can expect to pay around $10 per club or a set price to have the lie and loft changed on the entire set of clubs.
Keep in mind that if you are going to need a fitting in addition to the bending, you can expect to pay a lot more.
Fittings require players to use the high-end launch monitors, and it takes some time to determine the exact settings that all of the clubs in the bag are going to need.
Hopefully, you now feel better equipped to get your golf clubs bent to the proper angle.
This process is not all that difficult, but it can certainly help to make a major difference in your game.
We highly recommend having the bending of the clubs done by or under the supervision of a professional if you are not confident in your ability.
Although it is rare, you could end up doing major damage to your clubs if this process is not done the right way.
Take the time to do the research before you decide to become an amateur club fitter.
Leave a Reply